Skip to main content

How to Clean Your Keyboard

With everything that is happening with the COVID-19 virus, we know that a lot of folks are eager to clean and disinfect as much as they can. We are not virology experts and therefore cannot in good faith advise you on how to completely and safely disinfect your belongings. We can remind you to please be wary of using harsh chemicals and disinfectants on your keyboard and other gear. This below text is an approved keyboard cleaning method from our product team to keep your gear free of dirt and grime.


A clean keyboard is one that is less likely to fail on you. Don’t let crumbs, dust, crust, and dirt mess with your keypresses. Here's how to clean your keyboard!

You will need:

  • A bit of mild dish soap mixed into warm water (not too foamy)

  • Canned air

  • Microfiber cloth

  • Q-tips

Steps:

  1. Unplug your keyboard – don’t want to break it while cleaning it!

  2. Turn the keyboard upset down and give it a good shake to get some of the debris loose.

  3. Using a keycap puller, start removing keycaps.
    (Pro tip: take a picture of your keyboard beforehand for reference, so you can easily return all the keys to the right place.)

  4. After removing they keycaps, turn your keyboard upside down and give it a good ole shake once more. Do this outside so you won’t transfer all the dirt to your desk.

  5. Soak your keycaps in warm soapy water to remove any dust or grime. Ideally, swish them around for the first 5-10 minutes, and then let them soak for an additional 45 minutes.

  6. Shoot some canned air into the board to further remove any straggling lint or dirt.

  7. Using the cloth dipped in soapy water and q-tips, wipe down your keyboard to your desired cleanliness level, making sure to remove excess moisture. Be sure to wring out as much water from the cloth as possible - you don’t want to risk getting a drop of water in your keyboard. It's best to entirely avoid wiping the actual switches, especially the top, since any dampness could cause damage.

  8. Remove the keycaps from their soapy water soak and wipe them down to clean any lingering grime, if necessary. Allow to air dry on a towel (letter side up) for at least 6 hours. If you simply dry them off with a towel and immediately return them to the keyboard, there is a risk that moisture trapped in the stems will drip down and kill the switch.

  9. Make sure everything is dry before reassembling.

  10. Take pictures to prove to your friends (and yourself) that you’re not a slob. Repeat as necessary.

Enjoy your clean keyboard!


Note: While we don't recommend them, if you do choose to use sprays, wipes, or any other cleaning and disinfecting products on your equipment, please carefully read all labels to ensure safe and correct use for both your belongings and your own health.


Read more: